Language
DSX 8000 CableAnalyzer
Certification of copper, MM and SM fiber Microscope and cleaning equipment included Get an overview with the Project Management ProjX Upload results to PC or LinkWare Live Can certify Cat 8, Class I / II
The instrument is user-friendly, very fast and makes the tests effective.
With the project management ProjX you can build up the test procedure for the entire network and the location before you start. You test all points safely and effectively. If it turns out that there is an error at one point, you can save the test, but this will be marked as an error. When all tests have been done, you can go back and correct the error, test again and with an approved test, the test is overwritten with the approved result. When all points have been tested as approved, you will see that the project has no points with errors and you can therefore make sure that all points have been tested and approved.
Of course, you can also include certification of fiber end faces with a video microscope. The test result is saved with a picture of the end surface and will thus be included in the test report.
This saves you the extra work by having to return to run new tests. You get a satisfied customer by sending a clear test report that shows that everything has been tested and certified.
Test results can be easily analyzed and transferred to the LinkWare Live cloud service, or you can transfer these to a PC and process the tests for printing or to .pdf reports via LinkWare for Windows.
Troubleshoot errors faster with Taptive user interface that graphically shows the source of errors including crosstalk, return loss and errors on the cable screen.
The Versiv platform can be easily upgraded to support future standards, you can use various modules and upgrade with new modules and accessories for copper DSX, fiber CertiFiber Pro OLTS (Optical Loss Test Set), or OptiFiber Pro OTDR (Optical Time Domain Reflectometer).
